Engineered to maximize vertical cubic clearance across Selangor warehouses, industrial distribution nodes, and micro-fulfillment centers. Every system is roll-formed with robotic precision and electrostatic epoxy powder protection.
Equipped with galvanized cascade wire mesh decks that eliminate dust accumulation and allow 100% sprinkler penetration to meet Malaysian fire safety regulations.
Get a Quote
Heavy-duty longspan shelving for automotive spare parts, hardware retail, and high-SKU distribution in Puchong and Balakong industrial zones.
Get a Quote
Self-nesting post pallets providing versatile, mobile block stacking for seasonal inventory peaks, chemical drums, and cross-docking operations at Port Klang.
Get a Quote
Engineered for long-length structural items, PVC conduits, steel piping, and sheet materials commonly distributed by building supply wholesalers across Rawang and Shah Alam.
Get a Quote
Autonomous carriage navigation reduces forklift travel inside racking corridors. Perfect for cold storage and FMCG bulk hubs in Subang and Bukit Raja.
Get a Quote
High-density longspan tiered shelving built with chemical-resistant powder finishes, optimized for commercial battery banks, heavy hardware, and fluid containers.
Get a Quote
Fully customizable structural uprights designed to optimize reach-truck aisles and vertical clearance up to 12 meters in standard Grade-A logistics warehouses.
Get a Quote
Cost-efficient, standardized China factory-direct selective racks. Supplied with pre-drilled base plates, expansion anchor bolts, and load rating signage.
Get a QuoteFrom the Port Klang Free Zone (PKFZ) to Shah Alam's automotive cluster, our industrial longspan and pallet systems address distinct localized logistical constraints.
Third-party logistics providers managing thousands of active SKUs need rapid multi-tier manual pick lines. Our medium-to-heavy longspan shelving provides adjustable shelf pitches (50mm steps) and steel shelf dividers to prevent order picking bottlenecking during mega e-commerce shopping campaigns.
Malaysia's automotive corridor relies on specialized storage for irregular body panels, mufflers, batteries, and fast-moving service items. Our industrial longspan units integrate vertical dividers, plastic container rails, and drop-in steel panels capable of supporting up to 800 kg per shelf level uniformly distributed.
High ambient humidity (80–90% RH) in the Klang Valley combined with chilled cold room cycles causes condensation on bare steels. Our multi-stage zinc phosphate pre-treatment followed by electrostatic thermo-hardened epoxy coating prevents flaking, blistering, and corrosive premature failure.
Comprehensive metallurgical properties, load tolerances, and design safety margins engineered specifically for high-turnover Malaysian logistics operators.
| Engineering Parameter | Light-Duty Longspan Shelving | Heavy Industrial Longspan Shelving | Multi-Tier Mezzanine Supported | Heavy Selective Pallet Racking |
|---|---|---|---|---|
| Steel Grade Standard | Q235B Cold-Rolled (GB/T 700) | High-Yield Q235B / Q355B Alloy | Structural Q235B High Tensile | Certified Q235B Structural Section |
| Load Capacity Per Tier | 150 kg – 350 kg UDL | 500 kg – 1,200 kg UDL | 300 kg – 800 kg/m² Floor Area | 1,000 kg – 4,500 kg per Beam Level |
| Standard Clear Heights | 1,500 mm to 2,500 mm | 2,000 mm to 5,000 mm | 3,000 mm to 9,000 mm (2-3 Tiers) | 2,500 mm to 12,500 mm High-Bay |
| Beam Pitch Adjustability | 50 mm Pitch Interlocking | 50 mm / 75 mm Pitch Punch | Integrated Racking Frame Nodes | 75 mm Step Beam Connector Holes |
| Decking Surface Material | 0.7mm Cold Formed Steel Plates | 1.0mm Ribbed Plates / 18mm Plywood | Galvanized Grating / Perforated Deck | Heavy Wire Mesh Deck / Pallet Support Bars |
| Surface Pre-Treatment | Hot Acid Pickling & Phosphating | Automated 8-Stage Spray Wash | Automated 8-Stage Spray Wash | Continuous Shot Blasting & Phosphating |
| Coating Finish & Micron | Epoxy-Polyester (60–80 μm) | TGIC-Free Electrostatic (70–90 μm) | Heavy Industrial Epoxy (80–100 μm) | Electrostatic Powder Coat (80–110 μm) |
| Malaysian Regulatory Code | BS EN 15512 & SEMA Compliance | FEM 10.2.02 / SEMA Code | UBBL 1984 / BOMBA Fire Sprinkler | FEM 10.2.02 / BOMBA Flue Standards |
How the New Industrial Master Plan 2030 (NIMP 2030) and cross-border trade are reshaping warehousing real estate and equipment requirements in Peninsular Malaysia.
Warehouse lease rates in prime zones such as Section 22 Shah Alam, Bukit Jelutong, and Petaling Jaya have risen steadily. Operators can no longer afford wide-aisle single-level storage.
Malaysia is a vital maritime transshipment hub for ASEAN. Under the ASEAN-China Free Trade Area, Chinese industrial racking enters with Certificate of Origin Form E privileges.
The Malaysian Fire and Rescue Department (Jabatan Bomba dan Penyelamat Malaysia) requires strict compliance for high-density warehouse storage systems under the Uniform Building By-Laws (UBBL).
Since 2001, Guangzhou Heda Shelves Co., Ltd. has delivered end-to-end engineered racking solutions across 120+ countries, maintaining complete quality control from raw steel coil slitting to container loading.
Direct procurement of premium Baosteel & Shougang prime Q235B cold-rolled steel with full mill test certificates.
Automated punch presses deliver precision pitch spacing (50mm / 75mm) across columns up to 12 meters length.
Chemical immersion baths strip all rolling oil and mill scale, depositing a dense zinc phosphate conversion coating.
Swiss Gema automated spray guns deposit 70–90 μm polymer powder cured at 200°C for exceptional tropical durability.
Direct technical and commercial answers addressing tariff exemptions, port clearance, delivery timeframes, and local structural compliance.
Request an immediate engineering consultation, structural load calculation, and free 3D CAD layout for your facility in Shah Alam, Subang, Bukit Raja, or Port Klang.