CE Certified Racked Warehouse Factory & Exporters

Commercial structural racking must comply with internationally acknowledged seismic, load testing, and manufacturing safety directives. Our systems hold valid CE Certification (No. 2435-CPR-8605159) under the Construction Products Regulation, ISO 9001:2015 Quality Management certification, and RoHS surface compliance. When designing layouts, our structural engineers model capacities in strict accordance with European EN 15512 (Steel static storage systems), US RMI (Rack Manufacturers Institute) standards, and regional municipal Civil Defense requirements for egress aisles and fire sprinkler flues.

Storage racking deployed in coastal and desert zones (e.g., Dubai, Dammam, Doha, Jeddah) faces accelerated surface corrosion from airborne salt mist and abrasive sand dust. We implement a continuous automated 10-step surface finishing procedure: mechanical shot-blasting followed by heated chemical pickling and zinc-phosphating. Finally, heavy-duty thermosetting epoxy-polyester powder is electrostatically applied and cured at 200°C. For exterior lumber yards or sub-zero refrigeration blast freezers (-30°C), we offer hot-dip galvanizing per ISO 1461, ensuring decades of corrosion-free service.

To receive an optimized CAD layout and price schedule within 24 hours, buyers should provide:

1. Warehouse Architectural Drawing: Floor plan CAD or PDF showing perimeter walls, interior structural columns, overhead lighting/duct clearances, and clear height under roof rafters.
2. Pallet Characteristics: Width, depth, overall height including cargo overhang, and maximum gross weight per pallet position (e.g., 1200x1000mm, 1500kg).
3. Material Handling Equipment: Make and model of forklifts (counterbalance, reach truck, VNA turret truck), mast extended lift heights, and minimum turning radius requirements.
4. Environmental Factors: Ambient dry warehouse, climate-controlled, or sub-zero cold room temperatures.

With our 30,000 square meter facility and 30,000-ton monthly capacity, standard pallet racking projects of 1 to 5 forty-foot high-cube containers (40HQ) are typically manufactured, inspected, and palletized in 15 to 20 working days from drawing approval. Ocean freight transit times from our Guangzhou/Shenzhen export ports typically average:

• Jebel Ali / Khalifa Port (UAE): 14 to 18 days
• Dammam / Jeddah Islamic Port (Saudi Arabia): 18 to 24 days
• Hamad Port (Qatar) / Shuwaikh (Kuwait): 18 to 22 days
• European Main Ports (Rotterdam, Hamburg): 28 to 35 days

Every production lot undergoes yield point verification, weld ultrasonic check, and pre-loading bolt connector testing. Upright frames and beams are bundled with high-tensile steel straps, surrounded by protective corrugated cardboard edge protectors and heavy stretch film wrapping to avoid metal-to-metal rubbing during rough ocean sea voyages. Accessories, baseplates, shims, and safety locking pins are packed in heavy-duty reinforced wooden crates or galvanized wire cages with water-resistant desiccants.

Yes. Every order is delivered with comprehensive exploded 3D assembly diagrams, bolt torque specifications, and sequenced erection protocols. For local installation crews, we provide live video engineering support. For major logistics hubs, cold storage installations, and automated radio shuttle systems exceeding 5,000 pallet positions, we dispatch veteran on-site installation supervisors to guide local labor, supervise laser alignment, and coordinate handover documentation for insurance underwriters and municipal fire inspectors.